8 Featured Plane: The Cessna 150
18 Avionics: What’s Going on at Aspen
22 Borescoping Part 2: Performing Cylinder Inspections
26 Modernizing the Cessna 150/152 Panel
32 How to Repair Plastic Trim
46 Hangar Tip: How to Address Gear Corrosion
the seat rail is an integral part of the structure of the belly of the airplane. You can’t drill the seat rails off and fly around without the seat rails.
Read More
AWI (Aerospace Welding Minneapolis, Inc.) and Acorn Welding of Edmonton, Canada, have merged under the roof of Hartzell Aerospace Welding, creating a one-stop shop for owners of legacy Cessna and Piper planes to source all their exhaust, engine mounts, and air box needs.
Read MoreOn Sept. 26, the FAA issued Special Airworthiness Information Bulletin (SAIB) NE-06-31R6, which alerts owners of aircraft with certain Lycoming engines about changes related to lubricating oils. The first concerns the name...
Read More
This Part 1 article’s objective is to explain how borescoping can help you reduce the cost of maintenance while improving the reliability and safety of operating your airplane.
Read More
Each month we feature an affordable tip for improving your airplane and in a recent issue, a COO...
Read More
A Cessna 182P that went down during weather in Tennessee in early September was the 48th fatality...
Read More
When Russel Moore talks about his airplane and about flying, he speaks in third person. It’s always about the people who got him where he is today.
Read More
This article about the restoration of Steve Compton’s 172 started in the July 2022 issue with a look at the plane’s disassembly and painting. In August, we detailed the panel’s makeover. This month we finish with the interior upgrades and reassembly.
Read More
8 Off to a Flying Start: Austin Levin Takes to the Skies in a 180H Skywagon
18 Avionics: Digital Autopilots Five Years Later
22 Sky Talk: Prop Strike Damage
26 Introduction to Borescoping Part 1
30 Kevin Horrell’s 182 Restoration Part 1: Interior and Panel
40 AWI, Acorn Merger Creates One-Stop Exhaust Shop
46 Hangar Tip: How the Seat Rail AD Inspection Works
“This is a big deal, but there is a lot of work yet to be done.” GAMI announced during a recent interview that it has received STCs to produce G100UL 100-octane unleaded avgas in all general aviation piston aircraft. The news...
Read More
NavStrobe Lighting Ltd. and Aircraft Spruce announced the world’s first user-installed strobe...
Read More
8 Featured Plane: P210R Centurion is Unique, Even Among P210s
18 Avionics: Are You Prepared for In-Flight Loss of Avionics?
22 Tips & Tales From the Left Seat: Engine Failure on Takeoff With a Return to the Field
26 172 Restoration Part 3: Interior Upgrades and Reassembly
46 Hangar Tip: Hidden Cause of Corrosion
Many people believe the Cessna 182 is the best general aviation airplane available, and whether that’s true or not, they’re certainly increasing in value as if it’s true.
Read More
On July 26, the FAA announced a proposed AD for affecting turbocharged, reciprocating engines with...
Read More
Bev Weintraub, Piper Owner Society member and owner of a Piper Archer II, was the winner of Cessna...
Read More
Q I have a 1975 182p with ASI (airspeed indicators) calibrated in mph on the outer...
Read More
8 182 Market Report & Tips
22 Avionics: Smart Tablets in the Cockpit
26 Sky Talk: Where to Land in an Emergency
30 172 Restoration Part 2: Panel
46 Hangar Tip: Fly Frequently, What It Means
Al Sidaras is proud to be an 80-year-old pilot, as well he should be. Most pilots have had to give up their flying hobby by then.
Read More
Whether it’s a rainy day or a perfect afternoon that calls for reading and a nap in the hangar, here are two books to consider adding to your collection.
Read More